KOMATSU D150A-1 and D155A-1
|We have had steering clutch discs produced, both friction discs and steel separator
plates, for the D150A-1 and D155A-1 steering clutches.
Quantities required are based upon your model, serial number, and the condition of your clutch.
Check your clutches closely. You can often get by with only replacing the friction discs. Use your best judgment for evaluating your steel plates. You do not want to install plates that are rough and will accelerate the wear on your new fiber discs. Clean them with wire brushes, sandblasting, or whatever it takes to get them as smooth as possible and then make your decision. It is up to you of course, but unless you just like to pull wrenches, these steering clutches are not that much fun to have to remove and reinstall because you tried to save a hundred dollar bill.
FOR AN UPDATED LISTIG OF AVAILABLE PARS AND
Email firstname.lastname@example.org for orders or questions.
Home | Clutch Discs | Crawler ID Tags | Inventory Index | Inventory Search